Big Tech

Fourier GR-2 Tops Six Robots on Dexterity With 53 DoF

Fourier GR-2 leads six humanoid and quadruped robots on joint count at 53 DoF, while South Korea's public buyers spent $149M on robots in one year.

Share:XLinkedIn

Key Takeaways

  • Fourier GR-2 tops this comparison at 53 DoF in its 12-DoF hand configuration, nearly double the 27 DoF of the Unitree H1-2, with arm reach extending to 1,920 mm in full configuration.
  • Unitree H1-2 leads on arm payload at 7 kg rated and 21 kg peak, while both Fourier GR-2 and ROBOTIS FFW-SG2 each rate a single arm at approximately 3 kg.
  • DEEP Robotics LYNX M20S hits 9 m/s lab maximum, compared to under 2 m/s for all four humanoids; the wheel-legged architecture also carries up to 100 kg max load on the M20S trim.
  • South Korean public buyers posted 1,276 robot procurement notices totaling approximately $149 million in 12 months, with monthly volume tripling from 51 in November 2025 to 169 in August 2026.
  • No manufacturer in this comparison publishes a list price, a consistent characteristic of pre-scale robotics where each deployment is a negotiated custom engagement.

Fourier Intelligence's GR-2 offers up to 53 degrees of freedom in its fully articulated configuration, nearly double the 27 DoF of the Unitree H1-2. South Korea's public procurement system, meanwhile, processed 1,276 robot-related notices in the 12 months through November 2026, totaling ₩198.8 billion (about $149 million at the November 16, 2026 exchange rate of ₩1,334.87 per dollar). Read together, the six robots in this comparison and the procurement ledger behind them describe a category pulling in sharply different directions.

Fourier GR-2 Reaches 53 DoF While Rivals Peak at 27

Degrees of freedom have become the most visible battleground in humanoid specification sheets, and the Fourier GR-2 spec sheet sets the high mark in this comparison. The GR-2 reaches 53 DoF total in its 12-DoF dexterous hand configuration: 7 per arm, 6 per leg, 1 waist, 2 head, plus up to 12 per hand. Its arm reach extends to 1,920 mm with the full dexterous hand installed, compared to 1,520 mm in the standard configuration. The GR-2 stands 1,750 mm tall and weighs approximately 63 kg, the lightest legged humanoid in this group.

The Unitree H1-2, the GR-2's closest rival on articulation, reaches 27 DoF: 6 per leg, 7 per arm, with 3 shoulder joints, 1 elbow, and 3 wrist joints per arm. That architecture gives each arm the same 7-DoF layout as the GR-2, but without the additional dexterity of a multi-joint hand. The Galbot G1 reaches 21 DoF in its upper body (neck 2, arms 7×2, waist 3, leg lift 2), excluding the wheeled base and interchangeable end effector. The ROBOTIS AI Worker FFW-SG2 reaches 25 DoF across arm, gripper, head, lift, and mobile joints. The DEEP Robotics Lite3, the smallest platform in this group at 12 to 13.5 kg, specifies exactly 12 DoF across its 12 leg joints per its motion SDK documentation. DEEP Robotics does not publish a DoF figure for the LYNX M20 on its English product page.

The GR-2's dexterous hand includes 6 array-type tactile sensors, enabling grasp feedback absent from the simpler grippers offered by most rivals. Fourier's Toolkit supports NVIDIA Isaac Lab, ROS, and MuJoCo, the same simulation stack used for most robot learning research. The GR-2 runs a 275 TOPS computing unit, matching the Galbot G1's NVIDIA AGX Orin 64GB platform, also rated at 275 TOPS. The ROBOTIS FFW-SG2 uses the NVIDIA Jetson AGX Orin 32GB, the lower-memory module in the same chip family. Fourier Intelligence announced the GR-2 in September 2024; the GR-2's peak torque exceeds 436 N·m total across all joints, though Fourier does not break that figure down by joint in the published spec sheet.

Stay Ahead

Get daily AI signals before the market moves.

Join founders, investors, and operators reading TechFastForward.

Unitree H1-2 Leads on Arm Payload at 21 kg Peak

Payload capacity separates the robots by as much as seven times. The Unitree H1-2 rates its arms at 7 kg normal load and 21 kg peak, backed by a knee joint torque of approximately 360 N·m and a hip torque of approximately 220 N·m. Its peak torque density of 189 N·m/kg is the most specific torque-per-mass figure published by any manufacturer in this group. The H1-2 stands approximately 178 cm tall and weighs about 70 kg, with a 0.864 kWh quick-swap battery and 3D LiDAR plus depth camera for 360° sensing.

The Galbot G1 rates each arm at 5 kg payload per arm, reaching 10 kg total dual-arm. The ROBOTIS AI Worker FFW-SG2 carries 3.0 kg per single arm and 6.0 kg dual-arm. The Fourier GR-2 rates its single-arm payload at approximately 3 kg. The DEEP Robotics Lite3's walking load ranges from 2.5 kg (LIDAR trim) to 5 kg (Basic trim); the heavier sensor trims sacrifice payload headroom to sensors and additional processing hardware, with the Pro trim at 4 kg and the Venture trim at 4.5 kg.

The outlier in raw load capacity is the DEEP Robotics LYNX M20, which is not a manipulation platform but a carrier. The M20 and M20 Pro handle a 15 kg standard payload and a 50 kg maximum load; the M20S version extends those figures to 36 kg standard and 100 kg max. That capacity comes from the wheel-legged architecture rather than from an arm mechanism, and the LYNX carries loads on a dorsal platform rather than via articulated hands.

The bear case for humanoid arm payload is straightforward: industrial robot arms in automotive plants routinely carry 10 to 50 kg with sub-millimeter repeatability. Critics argue that the 3 to 7 kg payloads posted by the humanoids here are commercially marginal for assembly work, and that manufacturers are selling on form factor and flexibility rather than on hard productivity numbers. The risk is that buyers focus on the anthropomorphic design and overlook that a fixed-installation arm at a fraction of the cost can outperform any humanoid arm at this payload range for most factory tasks.

DEEP Robotics LYNX M20 Hits 9 m/s When Humanoids Cap at 2 m/s

Locomotion speed divides this field more sharply than any other single specification. The DEEP Robotics LYNX M20S posts a lab-tested maximum speed of 9 m/s. The M20 and M20 Pro reach 5 m/s in lab conditions. All LYNX trims are safety-limited to 3 m/s in user mode and deploy at an operating maximum of 2 m/s for normal use. The wheel-legged architecture, with four legs each ending in a driven wheel, enables those numbers: the robot retracts its legs and rolls on flat ground, then extends to step over obstacles. The LYNX M20 was first described in product announcements in April 2025.

All four humanoids in this comparison move at 2 m/s or below. The Unitree H1-2 specifies a moving speed of less than 2 m/s. Both the Galbot G1 and the ROBOTIS AI Worker FFW-SG2 top out at 1.5 m/s on their omnidirectional wheeled bases; the FFW-SG2 uses a swerve drive while the Galbot G1 sits on a 600 × 600 mm 4-wheel omnidirectional base. The Fourier GR-2 walks at 5 km/h (approximately 1.39 m/s), the lowest peak speed among the humanoids and the only figure in this group reported as km/h rather than m/s.

The LYNX M20's terrain capability is also the highest on record here. It clears a 45° slope in lab tests, handles continuous stair heights of 25 cm (M20S: 30 cm), and clears a single step of up to 80 cm (M20S: 100 cm). It carries dual 96-line 360° LiDAR units at approximately 860,000 points per second (M20S: 128-channel, approximately 1,152,000 pts/s). Its IP66 weather rating (M20S: IP67) is the only published ingress protection figure in this comparison; none of the four humanoids publish an IP rating on their product pages. The LYNX M20 and M20 Pro each weigh 35 kg with battery, the M20S 36 kg, within a standing envelope of 820 × 430 × 570 mm for all trims.

South Korea Spent 49M on Robots in 12 Months via KONEPS

Korea's Government e-Procurement System (KONEPS, 나라장터) recorded 1,276 robot-related procurement notices in the 12 months from November 2025 to November 2026, totaling ₩198.8 billion (approximately $149 million at the November 16, 2026 ECB rate of ₩1,334.87 per dollar, sourced via data.go.kr). The humanoid robot segment alone accounted for 197 notices worth ₩22.3 billion (approximately $16.7 million). The quadruped segment logged 72 notices at ₩6.5 billion (approximately $4.85 million). The remaining 1,007 notices, covering other robot categories, totaled ₩170.1 billion (approximately $127.5 million).

The monthly volume tells a sharper story than the annual total. November 2025 saw 51 notices. That figure climbed to 80 in December 2025, reached 86 in April 2026, and hit a 12-month high of 169 in August 2026. October 2026 posted 163 notices. The November 2026 partial count stands at 112 with the month not yet complete, suggesting the pace has not slowed. That is a roughly threefold increase in monthly volume over 12 months.

The largest single notice in the dataset came from the Korea Public Procurement Service, Daejeon Regional Office (조달청 대전지방조달청), which tendered a completed prototype fabrication contract for an underwater walking robot at ₩4.1 billion (approximately $3.07 million) on September 10, 2026. Jeju National University Hospital (제주대학교병원) posted multiple notices for a surgical robot system purchase at ₩3.325 billion each (approximately $2.49 million) starting in February 2026. Korea's Defense Acquisition Program Administration, via the defense procurement portal D2B (d2b.go.kr), recorded a completed contract award for a combat experiment multi-legged walking robot lease ('26년 전투실험용 다족보행로봇 임차용역) with an award date of September 8, 2026. A separate defense plan for a robot-based office automation system (RPA) valued at ₩772 million (approximately $578,000) was listed for November 2026 procurement.

Korea Institute of Industrial Technology Led With 123 Procurement Notices

Korea Institute of Industrial Technology (한국생산기술연구원), the government-funded manufacturing research institute, filed the most notices in this window at 123, more than double the second-ranked institution. KAIST, Korea's national science and technology university (한국과학기술원), posted 53 notices. Korea Institute of Machinery and Materials (한국기계연구원) filed 47 notices, Seoul National University's Industry-Academy Cooperation Foundation (서울대학교산학협력단) logged 43, and EcoPeace Co., Ltd. (에코피스 주식회사) contributed 31 notices.

The composition of this buyer list matters for how to read the procurement numbers. Four of the five top institutions are publicly funded research organizations, not manufacturers or industrial deployers. Their procurement reflects laboratory equipment purchases and pilot program contracts rather than production deployment. That distinction means the ₩22.3 billion in humanoid procurement does not represent ₩22.3 billion in humanoid robots at work in Korean factories; it represents research acquisitions, development contracts, and pilot systems spread across government labs. The EcoPeace entry at position five is the only private company in the top five and the only buyer whose procurement likely reflects commercial rather than research intent.

ROBOTIS is a Korean manufacturer whose FFW-SG2 appears in this comparison. The FFW-SG2 carries a 2,040 Wh battery (25 V, 80 Ah), the largest published battery figure of any robot in this group by a wide margin; the Unitree H1-2 specifies 0.864 kWh (864 Wh). The FFW-SG2 weighs 90 kg, the heaviest platform alongside the Galbot G1 at 92.5 kg, both heavier by 27 to 29 kg compared to the Fourier GR-2 at 63 kg or the Unitree H1-2 at approximately 70 kg. The FFW-SG2's arm reach of 641 mm to the wrist is shorter than the Fourier GR-2's 1,520 mm, reflecting a compact mobile platform optimized for indoor service environments. Its software stack runs on ROS 2 with Python, C++, and a web UI, and communicates over Ethernet at up to 1 Gbps with internal RS-485 at 4 Mbps.

The Galbot G1 also runs on 275 TOPS compute via its NVIDIA AGX Orin 64GB module and integrates a head stereo camera, four torso RGB cameras, two wrist depth cameras, a base 3D LiDAR, and eight ultrasonic sensors. Its interchangeable end effector accepts a dexterous hand, suction, or gripper, giving the platform flexibility the fixed-gripper ROBOTIS FFW-SG2 (which lists a dexterous finger actuator as in development) does not yet match from the factory.

No Robot in This Comparison Publishes a List Price

All six products reviewed here share one feature not found on the spec sheet: a missing price. DEEP Robotics, Unitree, Galbot, Fourier Intelligence, and ROBOTIS each publish detailed hardware specifications but no list price, quote estimate, or even a price range on their English product pages as of November 2026. The DEEP Robotics Lite3 debuted at ICRA 2023 in London in May 2023, now more than three years ago, and still carries no published price. The LYNX M20 appeared in product announcements in April 2025; Fourier announced the GR-2 in September 2024. All remain priced by inquiry only.

The absence of prices tells buyers something the spec sheets do not: these are not off-the-shelf products. Each sale is a custom engagement, priced to the buyer's integration requirements, software licensing, support contract, and production volume. That model is rational when production runs number in the dozens or low hundreds and when each deployment requires deep customization. It becomes a friction point when buyers need to compare costs and build business cases, as the South Korean procurement records suggest they increasingly do. At some stage the category's growth depends on prices becoming publishable, which requires production economics that none of these manufacturers have yet reached at scale. The threefold increase in South Korean monthly procurement volume since November 2025 suggests buyers are willing to engage on inquiry-only terms, but the same trajectory also means the first manufacturer to publish a stable list price gains a first-mover advantage in the parts of the market where procurement offices need a number to process a purchase order.

Six robots, six missing prices, 53 degrees of freedom at the top and 12 at the bottom: this category hasn't decided what it is yet.


Key Takeaways

  • Fourier GR-2 tops this comparison at 53 DoF in its 12-DoF hand configuration, nearly double the 27 DoF of the Unitree H1-2, with an arm reach extending to 1,920 mm in full configuration.
  • Unitree H1-2 leads on arm payload at 7 kg rated and 21 kg peak, while both Fourier GR-2 and ROBOTIS FFW-SG2 each rate a single arm at approximately 3 kg.
  • DEEP Robotics LYNX M20S hits 9 m/s lab maximum, compared to under 2 m/s for all four humanoids; the wheel-legged architecture also carries up to 100 kg max load on the M20S trim.
  • South Korean public buyers posted 1,276 robot procurement notices totaling $149 million in 12 months, with monthly volume tripling from 51 in November 2025 to 169 in August 2026.
  • No manufacturer in this comparison publishes a list price, a consistent characteristic of pre-scale robotics where each deployment is a negotiated custom engagement.

Questions Worth Asking

  1. Humanoid arm payloads here range from 3 to 21 kg; industrial robot arms installed in factories for decades carry 10 to 50 kg with sub-millimeter repeatability. At what payload rating does a humanoid arm become commercially competitive with a fixed installation?
  2. Four of South Korea's five top robot procurement institutions are publicly funded research labs, not industrial deployers. When does research-led demand convert into production-deployment demand, and what metrics would signal the transition?
  3. If none of these manufacturers can publish a price, what does that say about whether this category has achieved repeatable production economics, and which company is closest to crossing that threshold?

Values come from manufacturer spec pages and public procurement records compiled by the TechFastForward data desk, linked inline.

Sources

  1. Fourier GR-2 spec sheet fftai.com
  2. Unitree H1-2 unitree.com
  3. Galbot G1 galbot.com
  4. ROBOTIS AI Worker FFW-SG2 robotis.us
  5. DEEP Robotics Lite3 en.deeprobotics.cn
  6. motion SDK documentation github.com
  7. September 2024 adnkronos.com
  8. DEEP Robotics LYNX M20 en.deeprobotics.cn
  9. April 2025 automation.com
  10. KONEPS, 나라장터 g2b.go.kr
  11. data.go.kr data.go.kr
  12. d2b.go.kr d2b.go.kr
  13. DEEP Robotics Lite3 debuted at ICRA 2023 in London prnewswire.com

Read Next

SpaceX Sells $32B in Bonds to Finance Nvidia Rubin Chips

Anthropic Raises $119.5B in Record IPO, Stock Soars 17%

Meta Plans $300 Muse Charm With Free Verizon 5G Data

Democrats Demand DOJ Records on OpenAI Copyright Filing

Newsletter

Enjoyed this analysis? Join the list for the email edition.

Daily AI signals. No noise. Built for founders, investors, and operators.

Share:XLinkedIn
</> Embed this article

Copy the iframe code below to embed on your site:

<iframe src="https://techfastforward.com/embed/fourier-gr-2-tops-six-robots-on-dexterity-with-53-dof" width="480" height="260" frameborder="0" style="border-radius:16px;max-width:100%;" loading="lazy"></iframe>